Authentic 3M™ HIP Prismatic Media: Manufactured using original 3M™ High Intensity Prismatic (HIP) 3930 & 3940 Series reflective sheeting for superior long-range retro-reflectivity and nighttime visibility.
10-Year Outdoor Service Warranty: Laminated with premium 3M™ 1170C protective overlaminate to ensure a 10-year outdoor lifespan resistant to UV fading, harsh weather, and peeling.
16 Years Manufacturing Expertise: Precision-printed via heavy-duty screen printing or OEM HP Latex digital technology in strict compliance with international traffic safety standards.
Low MOQ & Full Customization: Flexible ordering starting at a Low MOQ of 1 Piece, with custom dimensions, die-cut shapes, and corporate fleet branding.
Easy Wet Application: Designed for smooth wet-method installation using a mild soapy water solution, allowing easy positioning and bubble-free application.
| Quantity: | |
|---|---|
Parameter | Specification Details |
Material Base | Authentic 3M™ High Intensity Prismatic (HIP) Sheeting 3930 / 3940 Series |
Protective Overlaminate | 3M™ 1170C Protective Overlaminate Film |
Outdoor Warranty | 10-Year Quality Warranty (Anti-UV, anti-fading, weather resistant) |
Manufacturing Expertise | 16 Years of Precision Reflective Converting & Customization |
Printing Technology | Precision Screen Printing / OEM HP Latex Digital Printing |
Compliance Standard | Engineered to strictly comply with international road & transport safety standards |
Application Method | Wet Application Method (Mild soap-and-water solution) |
Minimum Order Quantity | 1 Piece (Full custom sizes and contour die-cutting) |
Target Applications | Police cruisers, ambulances, fire trucks, commercial heavy trucks, fleet vehicles |
Emergency & First Responder Fleets: High-visibility safety markings, chevrons, and emblems for police cruisers, ambulances, and rescue apparatus.
Commercial Truck & Logistics Fleets: Truck body contour safety tape, trailer markings, and corporate brand graphics to elevate nighttime brand visibility and lower collision risks.
Corporate Fleet Visual Management: Custom fleet safety stickers designed to highlight brand image while providing maximum retro-reflective safety compliance.
Special Note: For unique or specialized vehicle contours, please consult our technical customer service team prior to installation.
Assemble the following tools prior to starting application:
Spray bottle (filled with clean water + a few drops of mild dish detergent)
Squeegee (plastic or felt-edge)
Cleaning cloth / Microfiber towels
Precision utility knife
Heat gun or hairdryer
Substrate Cleaning: Thoroughly clean the application area to eliminate grease, oil, wax, and dust. Ensure the panel is completely dry and free of debris.
Wet Lubrication Spray: Lightly mist the vehicle surface with the diluted soap-and-water solution. This prevents immediate adhesive tack and allows easy repositioning.
Positioning: Peel off the release liner from the 3M HIP reflective graphic, align it with the target panel, and lay it flat onto the wet surface.
Squeegee Water & Air Displacement: Using a squeegee with firm, overlapping strokes, sweep outward from the center to the edges to evacuate all water and trapped air bubbles.
Heat Conformance & Edge Trimming: Use a heat gun or hairdryer at a low temperature to gently soften the edges and corners, press them down firmly, and trim any excess film with a utility knife.
Curing Window: Allow the installed graphic to cure in a clean environment. Do not wash the vehicle, expose it to rain, or leave it in direct scorching sunlight for 24 hours post-installation to allow the adhesive layer to bond completely.
Issue | Primary Cause | Recommended Solution |
Sub-optimal Weather Conditions | Installation during extreme cold, direct scorching heat, or dusty/windy weather | Avoid installing in low temperatures, harsh direct sunlight, or dusty environments. |
Film Distortion / Reduced Reflection | Forcible pulling or over-stretching during installation | Do not forcibly pull or stretch the film, as it distorts the microprismatic optics and causes future delamination. |
Persistent Air Pockets | Incomplete water or air displacement during squeegeeing | Do not forcibly tear or peel cured film. Puncture the center of the air bubble with a fine needle tip and squeegee flat. |
Contact Mactape Application Engineers today to request material samples, technical datasheets, or a rapid custom quote!
