Custom Unified Branding Across Every Vehicle Fleet LOGO Design

Professional fleet design service — our design team adapts your brand guidelines to vehicle contours and viewing distances.
Precise color matching — Pantone-based color control ensures consistency across multiple print runs and vehicle types.
Scalable production — from one prototype vehicle to national fleet rollouts, with identical color and quality.
Multiple material options — choose standard cast vinyl, reflective vinyl for safety fleets, or removable vinyl for leased vehicles.
Pre-cut and ready to install — decals arrive organized by vehicle, with installation guides and optional transfer tape.
Quality control per vehicle — every decal is inspected for color, cutting accuracy and adhesion before shipment.

Quantity:
Availability:





Inquire Add to Basket

Product Description

Product Introduction

Our Custom Fleet LOGO Design & Decals service ensures every vehicle in your fleet carries your brand consistently and professionally. From design concept to finished decal, we manage the full process so your trucks, vans, buses and service vehicles present a unified identity on the road.

Using only premium cast vinyl and matched Pantone colors, we produce logos and lettering that resist fading, cracking and edge lifting across diverse climates. Combined with 3M protective overlaminate, your fleet branding remains crisp and legible for years of daily commercial operation.

Unified Brand IdentityConsistent logos across all fleet vehicles

Color MatchingPantone-accurate brand colors

3M OverlaminateProtection against UV, chemicals and abrasion

Full Design ServiceFrom concept to production-ready artwork

Product Specifications

Material	3M / ORAFOL / Avery cast vinyl
Overlaminate	3M 8518 Gloss / 8520 Matte / 8528 High UV
Printing	HP Latex digital printing with Pantone color matching
Cutting	Die-cut, kiss-cut or contour-cut
MOQ	1 piece / 1 vehicle set
Outdoor Life	5-10 years depending on material grade
Color Matching	Pantone / brand guideline matching
Typical Applications	Corporate fleets, rental fleets, government vehicles, franchise networks
Delivery Format	Individual decals per vehicle with layout guide

Applications

Fleet logo decals are used by any organization that needs consistent, professional vehicle branding:

Corporate FleetsRental Car FleetsGovernment FleetsFranchise NetworksUtility CompaniesDelivery ServicesPublic TransitService Contractors

Printing & Process

Fleet logo decals are printed using HP Latex or UV technology for sharp detail and long-term color stability. After printing, graphics are laminated with 3M cast overlaminate and precision-cut on advanced flatbed or roll-fed cutters. Each order is packaged by vehicle to simplify fleet installation.

Fleet LOGO Decal Installation Guide

Tools Required

Measuring tape, masking tape, squeegee, spray bottle with soapy water, utility knife, heat gun.

Installation Steps

Measure and mark. Use masking tape to mark the exact position of each logo element on the vehicle.
Clean thoroughly. Wash and degrease the area with isopropyl alcohol; dry completely.
Apply with transfer tape. Remove the backing, position the decal using the tape hinge method, and squeegee from the centre outward.
Remove transfer tape. Peel slowly at a shallow angle to ensure all fine details stay attached.
Heat-seal edges. Apply gentle heat to edges and around body seams to activate adhesive and prevent lifting.
Final inspection. Check alignment, bubbles and edge adhesion before moving to the next vehicle.

Important Notes

Use the same installation temperature range (15°C–30°C) across all vehicles for consistent adhesion.
Allow 48 hours before washing or waxing.
Store unused decals flat in a cool, dry place.