| Quantity: | |
|---|---|
3M™ 300LSE Low Surface Energy Adhesive Tapes Product Introduction
LSE Bonding Specialist: Specifically engineered to provide ultra-strong bonding solutions for difficult low surface energy (LSE) plastics, powder coatings, and lightly oiled surfaces.
Certified 3M Supply: 100% original and authentic 3M product backed by authorized converter certification.
Cleanroom Processing: Fabricated within a standardized dust-free, cleanroom workshop environment to eliminate contamination.
Extreme Die-Cut Precision: Processed via high-precision die-cutting machinery to guarantee burr-free edges, clean profiles, and tightly controlled dimensional tolerances.
Ultimate Customization: Flexible ordering with an ultra-low MOQ of 1 PC, supporting any size, custom geometry, or complex irregular shapes without restriction.
Model | Tape Structure Type | Thickness | Color / Property |
93005LE / 93005LEB | PET Double-Coated (With Carrier) | 0.05 mm | Transparent |
93010LE | PET Double-Coated (With Carrier) | 0.10 mm | Transparent |
93015LE | PET Double-Coated (With Carrier) | 0.15 mm | Transparent |
93020LE | PET Double-Coated (With Carrier) | 0.20 mm | Transparent |
9495LE | PET Double-Coated (With Carrier) | 0.17 mm | Transparent, General-Purpose |
9453LE | Adhesive Transfer Tape (Without Carrier) | 0.091 mm | Transparent Film |
9471LE | Adhesive Transfer Tape (Without Carrier) | 2.3 mil (0.058 mm) | Transparent Film |
9472LE | Adhesive Transfer Tape (Without Carrier) | 3.6 mil (0.091 mm) | Transparent Film |
9653LE | Adhesive Transfer Tape (Without Carrier) | 5.2 mil (0.132 mm) | Transparent Film |
9671LE | Adhesive Transfer Tape (Without Carrier) | 2.3 mil | Heavy-Duty High-Tack |
9672LE | Adhesive Transfer Tape (Without Carrier) | 3.6 mil | Heavy-Duty High-Tack |
Surface Preparation: The application surface must be completely clean, dry, flat, and free of dust, grease, or oils.
Environmental Conditions: Perform the installation at normal room temperature. Avoid cold, highly humid, or heavily dusty environments.
Application Process: Align the tape precisely with the target position, apply firm and uniform pressure to eliminate any air gaps, and ensure full surface contact.
Curing Period: Allow the bond to cure undisturbed for 24 hours to achieve maximum adhesion strength. Avoid pulling or moisture exposure during this period.
Substrate Compatibility: Universally fits metals, common plastics, acrylic, paper, and rubber. Note: Cross-testing is highly recommended for critical low surface energy materials before full mass production.
